Home
About
Contact

My 3D Printer
  ⇒ Plans & BOM 3D Printed Kayak
  ⇒ Plans & BOM My Fab@Home     ⇒ Plans & BOM

 As seen on:


RSS Feed

Fab@Home Model 2.0 Plans and Bill of Materials
February 24th, 2013
Fab@Home Model 2.0

Fab@Home Model 2.0

I have been receiving an unusually large amount emails lately from people asking where they can download the Fab@Home Model 2.0 plans and bill of materials (sometimes referred to as the “blueprints” for the machine). For some reason, they cannot be downloaded from the main Fab@Home website anymore. So, I have now put all of the source files up on this site (plans, bill of materials, CAD files and Laser Cutter layouts). Check out the Fab@Home Plans and Bill of Materials page.

Written by

11 Comments:
  1. dacian
    February 25, 2013 at 11:01 am #

    use ponoko. It is easy to get the profiles cut unless you have a better deal close to you.
    Any route you follow you can download the schematics directly from ponoko even thou it as I have built already one device I would most definitely not go for the plexiglass cut!
    It is extremely brittle. And you have an insane amount of screws. It is like a hammer made of glass: beautiful but useless.

  2. dacian
    February 25, 2013 at 11:04 am #

    and another mention:
    I bumped into this one after I actually made the printer, it does not have an extruder taking plastic wires like other printers!
    There is an option describing how you can hack a makerbot extruder!
    And it will give you so many headaches you would wanna quit.
    If anyone is interested I can share the designs of my double extruder that I made for the printer… I’m not sure anyone needs them. I can make them available with parts and solidworks design.

    • mike
      February 5, 2014 at 1:28 am #

      Hi, i’m very interested in your extruder designs. This printer is cool, but need a plastic print head like makerbot.

      Thanks!

      Mike

  3. faisal
    March 1, 2013 at 6:01 pm #

    Price

  4. faisal
    March 1, 2013 at 6:03 pm #

    Asking Price

  5. Sigu
    March 2, 2013 at 12:07 pm #

    Hello,
    look wonderful, how much?

  6. Emily
    March 8, 2013 at 7:25 pm #

    Thank you for making these files available! My senior design team is using the Fab@Home model 2 printer. We are having many problems, most notably the inability to print a nested part made of 2 materials (e.g. a tube around a cylinder). Do you know of any possible sources for this error?

    • Jim
      July 21, 2013 at 10:56 pm #

      Hello Emily, I do not really have any answers on the software

  7. Pansy
    January 25, 2019 at 7:15 am #

    Wonderful blog! Do you have any helpful hints for aspiring writers?
    I’m planning to start my own site soon but I’m a little lost on everything.
    Would you propose starting with a free platform like WordPress or go for a paid option?
    There are so many options out there that I’m completely confused ..
    Any recommendations? Thanks a lot! viagra tablets

Leave a Reply to dacian Cancel reply

Your email address will not be published. All Fields Required.1

© 2024 GrassRootsEngineering.com