I have been receiving an unusually large amount emails lately from people asking where they can download the Fab@Home Model 2.0 plans and bill of materials (sometimes referred to as the “blueprints” for the machine). For some reason, they cannot be downloaded from the main Fab@Home website anymore. So, I have now put all of the source files up on this site (plans, bill of materials, CAD files and Laser Cutter layouts). Check out the Fab@Home Plans and Bill of Materials page.
use ponoko. It is easy to get the profiles cut unless you have a better deal close to you.
Any route you follow you can download the schematics directly from ponoko even thou it as I have built already one device I would most definitely not go for the plexiglass cut!
It is extremely brittle. And you have an insane amount of screws. It is like a hammer made of glass: beautiful but useless.
and another mention:
I bumped into this one after I actually made the printer, it does not have an extruder taking plastic wires like other printers!
There is an option describing how you can hack a makerbot extruder!
And it will give you so many headaches you would wanna quit.
If anyone is interested I can share the designs of my double extruder that I made for the printer… I’m not sure anyone needs them. I can make them available with parts and solidworks design.
Hi, i’m very interested in your extruder designs. This printer is cool, but need a plastic print head like makerbot.
Thanks!
Mike
Price
Asking Price
http://www.grassrootsengineering.com/blog/fabathome-plans-and-bill-of-materials/
Hello,
look wonderful, how much?
Look at: http://www.grassrootsengineering.com/blog/fabathome-plans-and-bill-of-materials/
Thank you for making these files available! My senior design team is using the Fab@Home model 2 printer. We are having many problems, most notably the inability to print a nested part made of 2 materials (e.g. a tube around a cylinder). Do you know of any possible sources for this error?
Hello Emily, I do not really have any answers on the software
Wonderful blog! Do you have any helpful hints for aspiring writers?
I’m planning to start my own site soon but I’m a little lost on everything.
Would you propose starting with a free platform like WordPress or go for a paid option?
There are so many options out there that I’m completely confused ..
Any recommendations? Thanks a lot! viagra tablets